As technology seemingly combines each and every part of human life, this has also entered the power tool territory. With the creation of the dual saw, people will have an option regarding cutting requirements. It is created to slice all the way through different materials of differing firmness without adjusting the blade. This is a major enhancement from standard models that demand another saw blade for every scenario.

On the ordinary power saw, the cutting is accomplished from the turn of a disk fixed with teeth of various degrees of hardness. It spins in a single path — counterclockwise, and uses a tiny notch on the frame to guide the cut by eye. You can find direct drive versions in addition to the higher quality worm drives. Every one can be used for rough framing of structures typically. These products cut all the way through wood of many diverse types, however aren’t employed for metal. That would be a hack saw or reciprocating type, which have a finer blade that won’t chip or crack off whenever encountering this harder material.

The omni dual saw conversely offers 2 separate blades which each rotate in a different direction. That is, one rotates clockwise, as the other spins counterclockwise. Cutting may be accomplished up, down, backwards or forwards. This particular movement is supposed to assure a clean safer cut. It’s the only cutting system that will go from a rough cut to a finish cut without the need of changing the blades. Wood, metal, plastic, even PVC pipe can be cut with this device. It will cut through plexiglass without melting the stuff. Being able to plunge cut straight into any material without kickback or vibration is an additional advancement of this saw. The conventional skill saw could not perform most of these actions.

The technological innovation behind the Dual Saw is the motion of the counter-spinning blades. Designers spent about 8 years crafting the gear scheme that makes up this unique function. The proprietary design looks like something from the motor vehicle community, allowing this one of a kind power tool to be rather distinctive. Even though worm drive is comparable, it still powers a single, one direction blade. This sort of engineering innovation has never been observed before in a power saw of this sort.

There won’t be any pilot holes needed, and plunge cuts can be made with all the precision of a drill. No conventional saw can perform this sort of job devoid of more power tools.

For extra information, please visit us to read our complete dual saw review.